www.ptfeparts.com
APTLON™ 110
Glass & Moly Filled PTFE
(800) 752-7082
APTLON™ 110
Molded Rough Stock
Ready for Machining
APTLON™ 110:A blend of virgin TFE and a combination of glass & moly fillers.
The primary fillers are glass fibers and a metallic element added to increase resistance to deformation under load, and to increase strength and wear resistance.
Material Properties:
- Tensile Strength:
2200-2800 psi - Elongation: 200%
- Specific Gravity: 2.23-2.28
- Hardness, Shore D: 57-60
- Deformation:
2.0 - 4.0% (24 hr, 78 deg. F, 2000 psi) - Water Absorption: 0%
- Coefficient of Friction: .08 -.10 (dry, static)
- Coefficient of Friction: .15 -.27 (dry, dynamic)
Note: The property data offered represents average
values obtained on laboratory test samples.
Values listed are high limits. Properties may vary based upon processing technique. Data should be used only as a guide in selecting the appropriate compound. Actual performance will be affected by processing methods as well as end use service conditions.
APTLON™ is a trademark of Applied Plastics Technology, Inc.
Values listed are high limits. Properties may vary based upon processing technique. Data should be used only as a guide in selecting the appropriate compound. Actual performance will be affected by processing methods as well as end use service conditions.
APTLON™ is a trademark of Applied Plastics Technology, Inc.
Applied Plastics Technology, Inc.
45 Broad Common Road
PO Box 45
Bristol, RI 02809
800-752-7082
(401) 253-0200, Fax: (401) 253-0474
email: info@ptfeparts.com
About
Us | Processing | Fabrication | PTFE
Parts | Stock Shapes | Materials | Customer
Service | Teflon® | Home